Special While Stock Lasts
The projecta IS1220 is a powerful and compact lithium jump starter which is capable of starting most petrol engines up to 7.0L* and diesel vehicles up to 4.5 litres. One of the new features of the IS1220 is the Rapid Recharge Technology which means The Lithium Iron Phosphate (LiFePO4) battery can rapidly recover charge from the vehicle’s alternator following a successful jumpstart. Leaving the clamps connected to the vehicle’s battery for 40 seconds will recharge the Jump starter to 100% of the original charge status. Once the Jump starter is fully charged, the RRT will shut off avoiding overcharging.
Features:
SPECIFICATIONS | |||
---|---|---|---|
PART NO |
IS1220 |
||
APPLICATION |
Emergency |
||
OUTPUT |
12V |
||
EMERGENCY JUMPSTARTS |
68 (Petrol) 34 (Diesel) |
||
SUITABLE FOR VEHICLES |
Up to 7.0L petrol and up to 4.5L diesel |
||
VEHICLE VOLTAGE RANGE |
0 – 15.0V |
||
USB OUTPUT |
|||
USB OUTPUT |
2.1A, 5.0V |
||
USB LOW VOLTAGE DISCONNECT |
Battery voltage at 10.5 |
||
BATTERY |
|||
BATTERY CAPACITY |
12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V |
||
BATTERY CHEMISTRY |
Lithium Iron Phosphate (LiFePO4) |
||
THEORETICAL SHORT CIRUIT CURRENT |
1200A |
||
CLAMP OUTPUT |
400A |
||
TOTAL BATTERY CYCLES |
1800 |
||
JUMP STARTER LEADS |
|||
LENGTH |
Positive 31.0cm, negative 27.0cm |
||
CABLE |
8mm² 8(AWG) |
||
POLARITY PROTECTION |
MCU controlled with Electronic Switch Smart Module |
||
RECHARGING |
|||
CABLE |
1m long USB to Micro USB |
||
MICRO USB CHARGING PORT |
2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied) |
||
12V DC CHARGING |
12V to 5V 2.1Amp USB charger (provided) |
||
RECHARGE TIME |
8 hours |
||
JUMP STARTER |
|||
WEIGHT |
0.80 kg |
||
DIMENSIONS |
H: 50mm L: 197mm W: 95mm |
||
OPERATING TEMPERATURE |
-20°C to 60°C |
||
STORAGE TEMPERATURE |
-0°C to 45°C |
||
INGRESS PROTECTION |
IP53 (rain proof) with covers over the ports |